Release Notes¶
Android 11.0.0_1.0.0-var-som-mx8_v1.3
Release Notes¶
| Based on release | Google: android-11.0.0_r4 NXP BSP: Android 11.0.0_1.0.0 |
| Release tag | mx8-android-11.0.0_1.0.0-v1.3 |
| Release date | 06/24/2022 |
| Supported platforms | VAR-SOM-MX8 / SPEAR-MX8 |
| SOM revision | VAR-SOM-MX8 / SPEAR-MX8 v1.1 and higher |
| NXP BSP FTP | imx-android-11.0.0_1.0.0.tar.gz |
| Variscite BSP git | https://github.com/varigit/MX6x-android |
| Variscite BSP branch | android-11.0.0_1.0.0-var01 |
| Kernel git | https://github.com/varigit/linux-imx |
| Kernel branch | android-11.0.0_1.0.0-var01 |
| U-Boot git | https://github.com/varigit/uboot-imx |
| U-Boot branch | imx_v2020.04_5.4.47_2.2.0_var01 |
| File System build system | Android |
| Recovery SD card link |
mx8__yocto-kirkstone-5.15-2.0.x-v1.1__android-11.0.0_1.0.0-v1.3.img.gz
|
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log¶
| Change List | Description |
|---|---|
| Release 1.3 | |
| U-Boot: fec2: aligned to fec1 for consistency | |
| U-Boot: fec1: tune phy-reset-post-delay | |
| U-Boot: fec: add 20ms phy-reset-post-delay | |
| Linux: ethphy1: remove no need rx-internal-delay-ps property | |
| Linux: fec: add phy-reset-post-delay | |
| Linux: ptn5150: enable irq-is-id-quirk | irq-is-id-quirk allows the id pin to be used as an interrupt to avoid using a separate device tree file for Symphony <= 1.4. |
| Release 1.2 | |
| Linux: Enabled driver for ADIN1300 PHY | |
| Linux: Added RGMII RX Clock Delay for Symphony-Board Ethernet port | |
| Release 1.1 | |
| U-Boot: Introduce support for the i.MX8QP SoC | |
| Linux: Introduce support for the i.MX8QP SoC | |
| Linux: enable internal pullups for i2c0, i2c1, i2c3, i2c4 | Previously, internal pulldowns were enabled |
| P2P: Fix NULL pointer deference from brcmf_p2p_send_action_frameAPI | |
| Release 1.0 | |
| Android 11.0.0_1.0.0 (kernel 5.4.47) for VAR-SOM-MX8 and SPEAR-MX8 | |
| Known Issues | |
| WiFi hotspot SSID broadcast not working reliably | It is a known issue also on NXP's EVK |
| DisplayPort suspend/resume issue | Link training fails for DP upon resume from suspend |
| USB Type-A ports are not supported in U-Boot on SPEAR-MX8 | U-Boot USB driver does not recognize USB devices behind the hub |