Release Notes¶
Boot2Qt mx8-b2qt-dunfell-5.4-2.1.x-v1.2
Release Notes¶
| Based on release | B2Qt Dunfell, Poky 3.1, BSP: NXP 5.4.24_2.1.0, Linux: 5.4-2.1.x-imx |
| Release git | https://github.com/varigit/meta-variscite-boot2qt |
| Release tag | mx8-b2qt-dunfell-5.4-2.1.x-v1.2 |
| Release Branch | dunfell-var01 |
| Date | 07/06/2022 |
| Supported platforms | VAR-SOM-MX8 / SPEAR-MX8 |
| SOM revision | v1.1 and higher |
| Embedded Linux Distribution | B2Qt Community BSP Dunfell 3.1 based |
| B2Qt Community BSP link | https://doc.qt.io/QtForDeviceCreation/ |
| Qt version | 6.0.4 |
| Kernel git | https://github.com/varigit/linux-imx |
| Kernel branch | 5.4-2.1.x-imx_var01 |
| U-Boot git | https://github.com/varigit/uboot-imx |
| U-Boot branch | imx_v2020.04_5.4.24_2.1.0_var02 |
| Cortex M4 U-Boot support | MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8 |
| Cortex M4 Linux remoteproc support | MCUXPRESSO_2.9.0_V1.0_VAR-SOM-MX8 |
| File System build system | B2Qt Dunfell |
| Recovery SD card link | mx8-b2qt-dunfell-5.4-2.1.x-v1.2.img.gz |
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log¶
| Change List |
|---|
| Release 1.2 |
| U-Boot |
| imx8qm_var_som: enable RX clock delay for symphony ar8033 |
| imx8qm_var_som: fec2: add new properties to align with Hardknott release |
| imx8qm_var_som: fec1: tune phy-reset-post-delay with proper value |
| variscite: extcon-ptn5150: add ptn5150 driver |
| imx8qm-var-spear: fec: add 20ms phy-reset-post-delay |
| variscite: eth: ADIN1300: Disable RGMII RX clock delay |
| imx8qm-var-som: fix lvds_backlight_hog |
| imx8qm_var_som: drop unused board_rev environment variable |
| variscite: imx8_eeprom: drop VAR_EEPROM_F_LVDS and cleanup indentation |
| Kernel |
| imx8qm-var-som: configure symphony adi,phy-mode-overide to rgmii |
| imx8qm-var-som: ethphy1: remove no need rx-internal-delay-ps property |
| MLK-14644 PCI: imx: toggle the perst after the release of rc's reset |
| imx8qm-var-som: fec: add phy-reset-post-delay |
| net: phy: adin: add adi,phy-mode-override property |
| imx8_var_defconfig: enable docker requirements |
| imx8qm-var-som: dts: ethphy1: Add support for ADIN1300 PHY for VAR-SOM |
| MLK-25674 mmc: sdhci-esdhc-imx: remove command queue feature support |
| imx8_var_defconfig: enable driver for ADIN PHY |
| imx8qm-var-som: refactor to drop imx8qp-var-common.dtsi |
| Release 1.1 |
| U-Boot |
| imx8qm-var-som: Introduce support for the i.MX8QP SoC |
| imx8qm-var-som: Provide som_wifi kernel argument |
| imx8: ahab: Only compile ahab.c for u-boot |
| imx8 soms: Add USE_EMMC_BOOT_PART config to use user partition for fastboot |
| Kernel |
| Update kernel from version 5.4.85 to 5.4.142 |
| imx8_var_defconfig: add full docker support |
| imx8qm-var-som: Introduce support for the i.MX8QP SoC |
| imx8qm-var-som: enable internal pullups for i2c0, i2c1, i2c3, i2c4 |
| Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" |
| sn65dsi83: Add device tree property to swap LVDS Channel A/B |
| imx8qm-var-spear: Adjust usb hsic pad settings |
| ARM: configs: Variscite: Enable USB_HSIC_USB3053 |
| ARM: configs: Variscite: disable EVBUG module |
| ARM64: dts: imx8: Variscite: add WM8904 DRC support for all SoMs |
| ASoC: wm8904: extend device tree support |
| meta-variscite-boot2qt |
| Update Qt from version 6.0.3 to 6.0.4 |
| manifest: meta-variscite-fslc: Update to latest |
| b2qt-embedded-qt6-image: Add libgpiod and libgpiod-tools |
| b2qt-embedded-qt5-image: allow disabling virtual terminals |
| Variscite: mask linux-firmware bbappend in meta-boot2qt-distro |
| Merge branch '6.0' into dunfell-var01 |
| Release 1.0 |
| First Release |