Release Notes¶
Android mx8mm-android-14.0.0_1.0.0-v1.3
Release Notes¶
| Based on release | Google: android-14.0.0_r17 NXP BSP: Android 14.0.0_1.0.0 |
| Release tag | mx8mm-android-14.0.0_1.0.0-v1.3 |
| Release date | 04/30/2025 |
| Supported platforms | DART-MX8M-MINI / VAR-SOM-MX8M-MINI |
| SOM revision | DART-MX8M-MINI & VAR-SOM-MX8M-MINI V1.1 and higher |
| NXP BSP FTP | imx-android-14.0.0_1.0.0.tar.gz |
| Variscite BSP git | https://github.com/varigit/MX6x-android |
| Variscite BSP branch | android-14.0.0_1.0.0-var01 |
| Kernel git | https://github.com/varigit/linux-imx |
| Kernel branch | android-14.0.0_1.0.0-var01 |
| U-Boot git | https://github.com/varigit/uboot-imx |
| U-Boot branch | lf_v2023.04_android-14.0.0_1.0.0_var01 |
| Cortex M4 U-Boot support | MCUXPRESSO_2.13.0_V1.0_DART-MX8M-MINI |
| Cortex M4 Linux remoteproc support | MCUXPRESSO_2.13.0_V1.0_DART-MX8M-MINI |
| File System build system | Android |
| Recovery SD card link | mx8mm__yocto-scarthgap-6.6.52_2.2.0-v1.0__android-14.0.0_1.0.0-v1.3.wic.zst |
| Recovery SD card SHA256 | ca9f9b778286331f4c763d51cabb2e3884a87b595d92a98fab0eec1aaef34da3 |
After downloading the image, visit our Recovery SD card guide to learn how to program a recovery SD card.
Change Log¶
| Change List | Description |
|---|---|
| Release 1.3 | |
| Added SoM revision 2.x support for VAR-SOM-MX8M-MINI | |
| linux-imx Updates | Click here for a full detailed change list |
| uboot-imx Updates | Click here for a full detailed change list |
| Release 1.2 | |
| Fixed GPU crash on iMX8MM SOMs with 4GB RAM | |
| linux-imx Updates | Click here for a full detailed change list |
| Release 1.1 | |
| MX6x-android | imx8mm-var-dart: Update SELinux policy for RTC DS1307 chip |
| MX6x-android | mx8-install-android.sh: Update DART-MX8M-MINI image descriptions |
| MX6x-android | imx8mm-var-dart: Add PCIe driver module in vendor_dlkm. |
| linux-imx | imx8mm-var-dart: Disable wakeup source from RTC DS1307 |
| linux-imx | imx8mm-var-dart: Update input key to Volume Up/Down |
| linux-imx | imx8mm_gki.fragment: Enable PCIe phy for imx8mm. |
| Release 1.0 | |
| Initial release | Based on NXP's android-14.0.0_1.0.0 for the i.MX8M MINI |
| Known Issues | |
| Possible Wifi packets loss when using V1 SoMs | Fixed by MX6x-android@9565236 |
| Hardware Requirements | |
| At least 2 GB of RAM is highly recommended for Android | Lower RAM size may result in notably slower performance |