Android Recovery SD Card
Use a Yocto recovery SD card to install this Android release into the SOM's internal storage.
Prepare the Recovery SD Card¶
Follow the Yocto recovery SD card guide to download the Yocto release package and write its recovery image to an SD card. Writing the image erases the SD card. Check the target device before proceeding.
Power off the board, insert the recovery SD card, select SD boot, and power on the board. Log in to Yocto as root.
Run the following commands on the board, with an Internet connection.
Download the Android Release Package¶
Download mx8mm-android-16.0.0_2.0.0-v1.0.tar.zst and extract it:
wget https://variscite-public.nyc3.cdn.digitaloceanspaces.com/DART-MX8M-MINI/Software/android/mx8mm-android-16.0.0_2.0.0-v1.0.tar.zst
tar --use-compress-program=unzstd -xf mx8mm-android-16.0.0_2.0.0-v1.0.tar.zst
The package contains Android images in android-artifacts/android/ and installation scripts in android-artifacts/scripts/.
Install Android to eMMC¶
The installation replaces the contents of the SOM's internal storage.
Follow the installer's output and answer any prompts for your board configuration.
After it reports a successful installation, power off the board, select eMMC boot, remove the SD card, and power on the board to boot Android.